Best Access Control Systems in Chicago

Best Access Control Systems in Chicago

Quick Key Locksmith installs, integrates, and repairs access control systems throughout Chicago and the Chicagoland area. Whether you are replacing worn-out keys with keypads and card readers, adding mobile credentials, or upgrading an aging system that no longer fits your space, our technicians handle the assessment, the hardware, and the wiring from start to finish. We work with the leading access control brands so you are not locked into one manufacturer, and we help you weigh the real differences between them, which come down to features and price rather than the type or size of your building.

This page compares the systems we install most often so you can see how they stack up. Every one of these platforms works for offices, retail, industrial, and multi-tenant properties alike, large or small. Once you have a sense of what fits, our team can install it and support it across the city and the suburbs.

Ready to move forward? Contact us to schedule an on-site access control assessment or installation anywhere in Chicagoland.

Access Control Installation and Repair in Chicago

Installing access control is more than mounting a reader on a wall. We evaluate each opening, recommend hardware that suits your doors and traffic, run low-voltage wiring where needed, and configure the system so the right people reach the right areas. We also repair and upgrade existing systems, so if you inherited a setup that is failing or outdated, we can often modernize it rather than start from scratch.

Because access control ties into the rest of your building, we coordinate it with cameras, intercoms, and door hardware as part of one plan. Our work is backed by a 6-month labor warranty and a 1-year parts warranty where applicable, in addition to the manufacturer’s warranties on the equipment. For a broader look at how we approach the service, see our Access Control Systems page, then use the comparisons below to narrow your choice.

Access Control Systems at a Glance

The table below summarizes what each system does best, how it’s managed, and where it falls on the price scale. Use it as a quick reference, then read the sections that follow for details. Pricing tiers are relative and depend on your door count, credentials, and whether a system carries an ongoing software subscription.

System
What it Does Best
How It's Managed
Price Tier
Brivo
Cloud control of many doors and sites with mobile credentials
Cloud, browser, mobile app
Premium, subscription
Paxton Net2
Centralized control is kept on your own network
On-premise
Mid-range, strong value
Paxton 10
Access and video surveillance unified in one interface
On-premise with Cloud options
Mid-range
Schlage Engage
Straightforward wireless access without heavy infrastructure
Cloud, web, mobile app
Entry-level
iLOQ
Battery-free, wire-free locks with minimal maintenance
Cloud-managed rights
Higher upfront cost, low lifetime cost
ButterflyMX
Video intercom and entry on one platform
Cloud, mobile app
Mid-range, subscription
Latch (DOOR)
Smart access tied to building operations
Cloud platform
Premium, subscription

Brivo Cloud Access Control

Brivo Security Suite Standard Edition

Brivo Security Suite is available in four editions. The Standard Edition (shown here) is an entry-level solution with core functionality and add-on capabilities with essential tools to secure facility access, including event tracking, user and credential management, facility lockdown, and video surveillance integration.

Brivo is one of the original cloud-managed access platforms, built so you can run everything from a web browser with no on-site server to maintain. According to Brivo, the system combines door access, mobile credentials, video, and visitor management in a single cloud interface and administers unlimited doors and locations from a single dashboard. Credentials can be issued or revoked instantly, and an open API connects them to other building systems.

The standout features are centralized cloud control and strong support for multiple sites, which is why it appeals to anyone managing more than a handful of doors. On price, Brivo sits toward the premium end because it runs on an ongoing software subscription rather than a one-time purchase. We install and support it locally, and our Brivo Cloud Access Control page provides details on its deployment.

Paxton Net2 and Paxton10

Paxton offers two distinct systems, depending on how you prefer to manage access. As Paxton describes its lineup, Net2 is a networked system built for centralized control that runs on your own network, while Paxton10 adds video management and building automation through a single interface. Paxton10 scales to 1,000 doors and 1,000 cameras on a single server, and PaxLock wireless locks let you add controlled doors without running wire to every opening.

The key difference is unification: Net2 focuses solely on access, while Paxton10 combines access and surveillance. On price, Paxton is widely regarded as a strong value in the mid-range, in part because its core software does not carry the heavy recurring fees some platforms charge. That balance of capability and cost makes it a frequent recommendation for properties that need room to grow.

Schlage Engage™ Wireless Access Control

Schlage ENGAGE Cloud-based Access Control

ENGAGE cloud-based web and mobile applications are ideal for basic access control within small businesses and multifamily properties.

Schlage Engage, built on the Allegion ENGAGE platform, is a straightforward way to add access control without heavy infrastructure. The Allegion ENGAGE documentation describes its cloud-based web and mobile apps, which pair with wireless locks that connect over Wi-Fi, allowing administrators to configure settings, manage users, and review audit logs from anywhere. Schlage mobile Bluetooth credentials let staff unlock doors with their phones instead of badges.

Its strengths are simplicity and easy expansion, since wireless locks join the system without major wiring, and you can start with a few doors and add more later. On price, Schlage Engage sits at the entry level, thanks to a free cloud app and a low-complexity setup. That makes it a sensible starting point for reliable access control without a large upfront commitment.

iLOQ Battery-Free Access Control

iLOQ takes a different engineering approach by removing both batteries and wiring from the equation. As iLOQ explains, its locks harvest the energy they need from the smartphone tap or the physical key motion that opens them, so there are no batteries to replace and no cabling to install. Cylinders can be retrofitted into existing doors without drilling, and access rights can still be created, updated, or canceled remotely through cloud software.

The defining feature is maintenance-free operation, including reliable operation even during power or network interruptions. On price, iLOQ usually carries a higher upfront cost than a basic system, but it offsets that over time by eliminating battery service trips and wiring expense across many doors. For owners focused on the long-term cost of ownership rather than the lowest sticker price, that tradeoff often works in their favor.

ButterflyMX Video Intercom and Access Control

ButterflyMX Video Intercom

ButterflyMX Video Intercom installed on an exterior wall.

ButterflyMX blends a video intercom with access control on a single platform. According to ButterflyMX, the cloud-based system unlocks doors and gates with a smartphone, fob, card, or PIN, installs over most existing electronic or magnetic locks, and connects to its video intercoms and cameras for a building-wide solution. You can see and speak with a visitor before granting entry, and every door release is captured in a date-stamped log.

Its strongest feature is visitor management at a shared entrance, which sets it apart from systems focused only on credentialed staff. On price, ButterflyMX lands in the mid-range, with modest upfront cost paired with an ongoing subscription. It also pairs naturally with our Intercom installation and repair work, and our ButterflyMX Smart Video Intercom page explains how we set it up.

Latch, Now DOOR, Smart Access

Latch built its reputation on smart locks and access hardware, and the company has since rebranded as DOOR. As DOOR describes the change, the existing access hardware continues to be supported while the platform expands into a unified system that ties access, automation, and building operations together. Residents and staff use a phone or a code to access doors, common areas, and amenities, and managers handle credentials without printing fobs.

The feature that distinguishes it is how tightly access connects to broader building management rather than functioning as a standalone lock system. On price, it is generally a premium, subscription-based platform, reflecting the software and services layered on top of the hardware. We install and support the access hardware so you get the smart-entry experience without managing the rollout yourself.

How Do I Choose the Right Access Control System?

The best system is the one whose features and price fit how your property actually runs, not the one with the longest spec sheet. Start by counting your doors and users, then consider how credentials change over time and whether you manage a single site or several. From there, a few questions tend to narrow the field quickly.

  • How many doors and users do you need to manage, and will that number grow over the next few years
  • Do you prefer a cloud system you reach from a browser, or one kept on your own network
  • Which credentials matter to you, such as cards, fobs, PIN codes, or phone-based mobile credentials
  • Are you comparing upfront cost, ongoing subscription cost, or long-term maintenance like battery changes

If you want a deeper walkthrough of doors, locks, and permission levels, our blog post on choosing doors, locks, and user levels is a useful next read. We’re glad to assess your space and recommend the platform that fits your needs and budget. We also offer Net 30 billing options for corporate accounts.

Will an Access Control System Still Let People Exit During an Emergency?

Yes, and this is one of the most important parts of a professional installation. Life-safety codes require that doors in a means of egress let people exit freely, even when the system restricts who can enter. As this SecurityInfoWatch.com article on access control and NFPA 101 compliance explains, electrically controlled egress doors are designed to be fail-safe, releasing to allow free exit when power fails, or a fire is detected.

That balance between security and safe egress is exactly why hardware choice and proper setup matter. A correctly installed system keeps unauthorized people out without ever trapping anyone inside, and it ties into the fire alarm when the code requires it. We design installations with these requirements in mind so your property stays both secure and compliant with the local authority having jurisdiction.

Can Access Control Work With My Cameras and Intercom?

In most cases, yes, and integration is one of the strongest reasons to plan a system thoughtfully. Several of the platforms above, including Brivo, Paxton10, and ButterflyMX, are built to unify door access with video and intercom in a single interface. That means a door release can be tied to a camera clip, so you can see who entered at a given moment rather than piecing events together later.

Even if you keep separate systems, the pieces can usually be coordinated so they reinforce one another. Pairing access control with security cameras gives you both a gatekeeper and a witness at every entrance. When we plan an installation, we map out how access, video, and intercom should work together for your specific Chicago property before any hardware goes on the wall.

Schedule Access Control Installation in Chicago

Choosing among the access control systems available in Chicago comes down to matching the features and price to your doors, your users, and your plans for growth. There is no single winner, only the system that fits your property best, and Quick Key installs and supports all of the platforms above, so your decision is about the right fit rather than what one company happens to sell. Property managers and condo associations across Chicagoland have come to rely on our team for security work that is done right the first time.

Quick Key Locksmith & Security has served Chicago and the Chicagoland area since 2013, from the Loop and Lincoln Park to Schaumburg, Oak Brook, and the surrounding suburbs. Contact us today to schedule an access control assessment or installation, or you can stop by or call one of our three walk-in storefronts during business hours to discuss your access control project.

Call Now Button